How to Properly Use an IPL Hair Removal Device at Home

Prepare Your Skin
Clean the skin and shave the hair. Use the skin color card to check if the device is suitable for your skin tone.

Connect the Device
Plug the adapter into a power outlet and connect the cord to the device. The indicator light will turn solid green.

Turn On the Device
Press and hold the power button for 2 seconds to start. The fan will begin working. The device will start in manual mode at level 1.

Choose the Mode
Press the mode button (M) to select the area you want to treat: arms, legs, armpits, face, or private areas.
SR mode is used for skin rejuvenation.

Place on Skin
Put the treatment window flat on the skin with full contact. When the indicator light flashes, the device is ready.

Adjust Intensity Level
Press the switch button to choose the intensity level. Start from level 1 if you are using it for the first time. Higher levels give stronger hair removal results.

Start the Treatment
Press the flash/trigger button to release the light pulse.
For automatic mode, hold the flash button for 3 seconds, then release.

Turn Off the Device
After finishing, press and hold the power button for 2 seconds to turn off the device.